One way in which the team at Inertial Sense works to keep costs low is by using off-the-shelf parts for our IMX-5 sensor module. These parts, however, can often show high degrees of variance from the expected specifications. Expert calibration and an extensive validation process is essential to ensure that our inertial measurement units (IMUs) […]

At Inertial Sense, we design the most cost-effective and scalable tactical-grade inertial systems. We sat down with founder Walt Johnson recently to discuss some key questions about Inertial Sense, inertial systems, and the affordable options we offer for our clients. Here is what he had to say about Inertial Sense and the inertial systems we […]

At Inertial Sense, we design the most cost-effective and scalable tactical-grade inertial systems. We sat down with founder Walt Johnson recently to discuss some key questions about Inertial Sense, inertial systems, and the affordable options we offer for our clients. Here is what he had to say about Inertial Sense and the inertial systems we […]

Navigating the modern world can be challenging. Inertial Sense creates tactical-grade sensors that can provide the functionality needed for a wide range of products. The IMX-5 is a sensor module that can move freely through 10 degrees of freedom (DOF) and incorporates cutting-edge technologies to produce high-accuracy navigation data.      Three Types of […]

Inertial Sense is a manufacturer of Tactical Grade Inertial Systems. Our sensor is the smallest, most cost-effective Tactical Grade solution on the market with specifications comparable to that of many of our main competitors, but we are 2-3 times lower in cost. Our Inertial Sensors are designed to aid our customers in scaling their products. […]

One of the primary differences between industrial and tactical inertial measurement units is the price. Industrial sensors range in price from about $100 to over $1,000. Tactical IMUs are much more accurate, and, therefore, much more costly. They range from about $5,000 to more than $25,000 per unit. Watch the video below as Carson Herbert, […]

There are 4 grades of IMUs. Each of these grades serves a different purpose for customers with different needs. Watch the video below as Carson goes through the 4 grades of IMUs.  Consumer Grade IMUs Consumer-grade IMUs are made for automotive and commercial use. These inertial measurement units have the lowest cost of each […]

The IMX-5 is a low-cost, tactical grade IMU. Numerous companies have already shown interest in this revolutionary product. Watch the video below as Carson discusses the details of some of the use cases that have already implemented IMX-5.      Case Study: Defense and Aerospace In the first case study, a multi-billion dollar aerospace […]

Despite the financial market and supply chain disruptions, the need for Tactical Grade IMU’s and Inertial Sensors has never been higher. Almost everything being manufactured today has a motion component and needs to be tracked, driven, or analyzed.  So the question is, who can deliver the highest performance at the lowest cost?  Watch the video […]

Technology is a growing industry and shows no signs of slowing down. Watch the video below as Brett and Carson discuss what new technology Inertial Sense has to offer in terms of our new products and current technology (like our IMU sensors).  Inertial Sense not only offers autonomous software, but we offer RTK and are […]

There are different flavors of SLAM, and knowing which one is right for you matters. Watch the video below as Chase breaks down vSLAM vs LIDAR, some advantages, and disadvantages.   LIDAR is a light sensor. It uses lasers that shoots in different directions gathering information about objects around it. This technology can be found […]